CTHIn ForceLegislation
AD/ECUREUIL/132 - Emergency Floatation Gear
Eurocopter AS 350 (Ecureuil) Series HeliEurocopter AS 350 (Ecureuil) Series Helicopters
Start here
Get a plain-English read of Eurocopter AS 350 (Ecureuil) Series Heli
Turn the raw legal text into a practical explanation grounded in AD/ECUREUIL/132 - Emergency Floatation Gear.
Eurocopter AS 350 (Ecureuil) Series Helicopters
| AD/ECUREUIL/132 | Emergency Floatation Gear | 13/2008 DM |
|---|
| Applicability: | Model AS350 BA helicopters, all serial numbers, fitted with emergency floatation gear including the container assemblies listed below, and for which an operating time limit extension has not been already granted by the equipment manufacturer AERAZUR:- Left hand container assembly part number 158170 or 158210-1; and,- Right hand container assembly part number 158171 or 158215-1. |
|---|---|
| Requirement: | Replace container assemblies in accordance with Eurocopter Alert Service Bulletin No. 25.01.02 Revision 0, dated 24 September 2008, or later EASA approved revision, at the times specified in the Compliance section:A possible non-recurring extension to the operating time limit of the container assemblies installed on a helicopter can be obtained, by returning them to the equipment manufacturer for examination.From the effective date of this Directive, no person shall install container assemblies manufactured 10 or more years ago on a helicopter, unless they are returned to the equipment manufacturer for examination and have obtained a non-recurring extension to the operating time limit.From the effective date of this Directive, no person shall either continue operation or install on a helicopter, container assemblies with operating time limit extensions granted by the equipment manufacturer if the extension time limit has already expired.Note: EASA AD 2008-0189 refers. |
| Compliance: | 1. If the container assemblies were manufactured 12 or more years ago, within 30 days after 24 October 2008.2. If the container assemblies were manufactured between 10 and 12 years ago, within 60 days after 24 October 2008, without exceeding 12 years and 1 month since the equipment date of manufacture, whichever occurs first. |
| 3. If the container assemblies were manufactured between 9 and 10 years ago, no later than 10 years and two months since the equipment date of manufacture.4. If the container assemblies were manufactured less than 9 years ago, no later than 10 years since the equipment date of manufacture. | |
|---|---|
| This Airworthiness Directive becomes effective on 24 October 2008. | |