CTHIn ForceLegislation
AD/EC 135/18 - Cyclic-Stick Locking Device - Modification
Eurocopter EC 135 Series HelicoptersEurocopter EC 135 Series Helicopters
Start here
Get a plain-English read of Eurocopter EC 135 Series Helicopters
Turn the raw legal text into a practical explanation grounded in AD/EC 135/18 - Cyclic-Stick Locking Device - Modification.
Eurocopter EC 135 Series Helicopters
| AD/EC 135/18 | Cyclic-Stick Locking Device - Modification | 8/2008 |
|---|
| Applicability: | Eurocopter Deutschland (ECD) GmbH EC135 and EC635 series helicopters, all models, serial number (S/N) 0005 through 0699 inclusive, except S/N 0028, 0076, 0093, 0098, 0099, 0102, 0104, 0106, 0108, 0110, 0111, 0113, 0114, 0116, 0117 and 0119. |
|---|---|
| Requirement: | 1. Modify the cyclic stick locking/centering device by removing the slide and spring from the cyclic stick cantilever in accordance with ECD Alert Service Bulletin (ASB) EC135-67A-015 dated 14 April 2008, or later NAA approved revision.2. Amend the Rotorcraft Flight Manual (FLM) by inserting the following note:NOTE: Before starting the engines, the cyclic stick must be moved to its neutral position. By folding up the cantilever to the pin, it is possible to move the cyclic stick into its neutral position and to centre it. A locking of the cyclic stick is no longer possible.This may be accomplished by inserting a copy of this AD into the FLM, or by FLM page(s) supplied by ECD.Note: EASA AD 2008-0113 dated 10 June 2008 refers. |
| Compliance: | Within 30 days after the effective date of this AD, unless previously accomplished. |
| This Airworthiness Directive becomes effective on 31 July 2008. | |
| Background: | There have been several cases reported where take-off was executed with a locked cyclic stick. A locked cyclic stick may lead to loss of control of the helicopter. In order to prevent any further occurrences of inadvertent take-off with a locked cyclic stick, Eurocopter Deutschland has developed a modification of the cyclic stick cantilever. After modification, locking of the cyclic stick is no longer possible. The cyclic stick can only be centered in its neutral position. |
Image unavailable in extracted text
James Coyne
Delegate of the Civil Aviation Safety Authority
20 June 2008