CTHIn ForceLegislation
AD/EC 120/9 Amdt 1 - Collective Pitch Lever Friction Mechanism
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
AD/EC 120/9 Amdt 1 - Collective Pitch Lever Friction Mechanism
Start here
Turn the raw legal text into a practical explanation grounded in AD/EC 120/9 Amdt 1 - Collective Pitch Lever Friction Mechanism.
| AD/EC 120/9 Amdt 1 | Collective Pitch Lever Friction Mechanism | 6/2005 |
|---|
| Applicability: | All EC 120 helicopters. |
|---|---|
| Requirement: | 1. Operation of the collective pitch lever friction mechanism by helicopter crews:a. Only slightly tighten the collective pitch lever friction.b. If stiff operation is felt in flight with the collective pitch lever, loosen the collective pitch lever friction immediately.2. Action in accordance with the instructions described in paragraph 2.B.2.a. of Eurocopter EC 120 Alert Service Bulletin (ASB) No. 67A009, or later EASA approved revision.3. Action in accordance with the instructions described in paragraph 2.B.2.b. of ASB No. 67A009, or later EASA approved revision.Note: DGAC AD F-2002-606 R1 refers. |
| Compliance: | 1. As from the next flight after 22 January 2003, and each flight thereafter; until compliance with Requirement 2.2. Within 110 flight hours or 3 months after 22 January 2003, whichever occurs first; and each time a replacement friction mechanism is installed on a helicopter.3. Within 110 flight hours or 13 months, whichever occurs first, following compliance with Requirement 2.The compliance times remain unchanged by this issue. |
| This Amendment becomes effective on 9 June 2005. |
| Background: | A report was received of collective pitch lever stiffness during flight. Investigation revealed an increased pad friction factor due to local unevenness of the pad material.Amendment 1 is issued in response to a revision of the related DGAC AD, which converts the Requirement document to an Alert Service Bulletin; with no change to the technical content. |
|---|
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
27 April 2005