BlanchAir (Eagle / Bellanca) DW-1 Series
BlanchAir (Eagle / Bellanca) DW-1 Series Aeroplanes
BlanchAir (Eagle / Bellanca) DW-1 Series Aeroplanes
| AD/DW-1/1 | Elevator Push Tube - Replacement | 3/2019 |
|---|
| Applicability: | BlanchAir model DW-1 aircraft, Serial Numbers 0001 to 0092 inclusive, except for Serial Number 0074. |
|---|---|
| Requirement: | 1. Accomplish the requirements of United States of America Federal Aviation Administration (FAA) Airworthiness Directive (AD) 82-22-03, effective 1 November 1982, as in force at the date of commencement of this AD. |
| Compliance: | 1. a) Within 25 hours after the commencement date of this AD on aircraft having 400 or more hours’ time-in-service or prior to the accumulation of 425 hours’ time-in-service on airplanes with less than 400 hours’ time-in-service, unless previously accomplished, andb) each 400 hours’ time-in-service after any installation of aft elevator push tube assembly P/N 162000-29, unless a new aft elevator push tube assembly part number (P/N) 162000-33 is installed in accordance with the technical instructions of Eagle Aircraft Service Letter (SL) 83-2 dated 13 April 1983 and as in force at the date of commencement of this AD.Note: Installation of P/N 162000-33 terminates the requirement of this AD. |
| This AD commences on 8 February 2019. | |
| Background: | This AD is issued to ensure that all Australian registered BlanchAir DW-1 aircraft comply with the requirements of FAA AD 82-22-03, including any aircraft that have been or will be imported in future.FAA Approved SL 83-2, issued 13 April 1983, requires installation of aft elevator push tube assembly P/N 162000-33. Compliance with this Service Letter supersedes the requirements of Eagle Aircraft Service Letter No 82-6 and FAA AD 82-22-03. |
View image in the official source
Pieter van Dijk
Delegate of the Civil Aviation Safety Authority
4 February 2019