CTHIn ForceLegislation
AD/DO 328/6 - Engine Control Cable Heating Tubes
Dornier 328 Series AeroplanesDornier 328 Series Aeroplanes
Start here
Get a plain-English read of Dornier 328 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/DO 328/6 - Engine Control Cable Heating Tubes.
Dornier 328 Series Aeroplanes
| AD/DO 328/6 | Engine Control Cable Heating Tubes | 1/2006 |
|---|
| Applicability: | Dornier 328-100 aeroplanes, serial numbers 3005 through 3111 inclusive. |
|---|---|
| Requirement: | 1. Unless previously accomplished, install heating tubes on the control cables in the cockpit.2. Unless previously accomplished, install heating tubes on the control cables in the LH and RH engine balcony.Carry out the above requirements in accordance with Dornier 328 Service Bulletin No. SB-328-76-254 Revision 2 dated 29 November 1999 and Dornier 328SB-328-76-267 Revision 3 dated 28 October 1999 or later LBA approved revisions.Note 1: The LBA has added the check intervals for the heaters to the Certification Maintenance Requirements Document and the life limit for the heaters are added to the Airworthiness Limitations Document.Note 2: LBA AD 1997-148/7 refers. |
| Compliance: | Within 30 days after the effective date of this AD. |
| This Airworthiness Directive becomes effective on 19 January 2006. | |
| Background: | Ice build-up on the engine control push pull cables can cause friction or jamming of the engine controls. This AD requires the installation of heating tubes to the engine control cables. |
Image unavailable in extracted text
James Coyne
Delegate of the Civil Aviation Safety Authority
29 November 2005