CTHIn ForceLegislation
AD/DO 328/35 Amdt 1 - Rudder Spring Tab Lever Assembly
Dornier 328 Series AeroplanesDornier 328 Series Aeroplanes
Start here
Get a plain-English read of Dornier 328 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/DO 328/35 Amdt 1 - Rudder Spring Tab Lever Assembly.
Dornier 328 Series Aeroplanes
| AD/DO 328/35 Amdt 1 | Rudder Spring Tab Lever Assembly | 9/2008 |
|---|
| Applicability: | Model 328-100 aircraft, all serial numbers, with part number 001A272A4020-002 rudder spring tab lever assembly installed. |
|---|---|
| Requirement: | Action in accordance with the requirements of EASA AD 2008-0107.Note: AvCraft Aerospace GmbH ASB-328-27-036 dated 12 February 2003 andASB-328-27-036 Revision 1 dated 7 May 2004, and 328 Support Services GmbH ASB-328-27-036 Revision 2 dated 24 January 2008, or later EASA approved revisions, refer; and, AvCraft Aerospace GmbH SB-328-27-459 dated 3 May 2004 and 328 Support Services GmbH SB-328-27-459 Revision 1 dated 24 January 2008, or later EASA approved revisions, refer. |
| Compliance: | As specified in the Requirement document, with Compliance (1) effective date to be read as the date specified in the original issue of this Directive (19 January 2006). |
| This Amendment becomes effective on 28 August 2008. | |
| Background: | The manufacturer has determined that the possibility of failure exists in the rudder flight control system due to cracks in the spring tab lever assembly bearing lugs.Amendment 1 is issued in response to a new EASA AD, which expands applicability, reduces the inspection interval to 400 flight hours, and requires replacement of the rudder spring tab lever assembly with an improved unit as mandatory terminating action to the inspection requirement. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
14 July 2008