Commonwealth legislation

AD/DHC-1/30 Amdt 1 - Engine Mount Upper Attachment Points/Reinforcing Plates

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

Requires adding external reinforcing plates and an inspection access hole around the two upper engine‑mount attachment points on De Havilland DHC‑1 (Chipmunk) aircraft; applies to all models. General compliance is before 1 August 1986, with re‑engined aircraft that need further evaluation allowed an extension to 31 December 1986. (Requirement, Applicability)

Owners/operators pay for the work and inspections; the Secretary must approve any alternative evaluation or modification scheme, creating administrative discretion and an operator compliance cost. (Requirement, Background)

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/DHC-1/30 Amdt 1 - Engine Mount Upper Attachment Points/Reinforcing Plates.

AD/DHC-1/30 Amdt 1 - Engine Mount Upper Attachment Points/Reinforcing Plates

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
De Havilland DHC-1 (Chipmunk) Series Aeroplanes

AD/DHC-1/30

Amdt 1

Applicability: All models.

Engine Mount Upper Attachment Points/Reinforcing Plates

10/86 DM

Requirement: Action in accordance with:

British Aerospace TNS Chipmunk (C1) No. 180 Issue 1, and

b. British Aerospace Modification Chipmunk H358. Compliance: Prior to 1 August 1986.

Aircraft which have been modified to a different engine installation are affected by this Directive. Some of these aircraft have external reinforcing doublers which may not be sufficient to meet the requirements of this Directive. If there are no doublers present or if they do not cover the vertical and horizontal extent of Mod. H358, or are not of the required thickness, the aircraft will need further evaluation and/or modification in accordance with a scheme approved by the Secretary. For these aircraft only, the compliance date is extended to 31 December 1986.

Background: External reinforcing plates are introduced on the forward fuselage skin adjacent to the two engine upper mounting attachment points, together with an access hole for periodic inspection of the upper deck plate and adjacent internal structure. This amendment clarifies the position with regard to re-engined aircraft such as the DHC- 1/A1 and DHC-1/A2.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/DHC-1/30 Amdt 1 - Engine Mount Upper Attachment Points/Reinforcing Plates