Commonwealth legislation

AD/DH 60/7 Amdt 1 - Introduction of Increased Strength Seat Harness Transverse Cable

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

2/10 complexity

This AD requires owners/operators of all De Havilland DH 60 (Moth) series aircraft to replace the seat‑harness transverse (shoulder) cable with a higher‑strength cable (per BAe TNS CT(Moth) No 37 Issue 2 or an equivalent) by 22 February 2002. CASA’s delegate revoked the prior AD after a UK investigation found transverse‑cable failures under overload. Owners pay to replace the cable, must follow the specified instructions, and may use alternate cables of equivalent or greater strength (Requirement; Compliance; Background).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/DH 60/7 Amdt 1 - Introduction of Increased Strength Seat Harness Transverse Cable.

AD/DH 60/7 Amdt 1 - Introduction of Increased Strength Seat Harness Transverse Cable

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/DH 60/7 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

De Havilland DH 60 (Moth) Series Aeroplanes

AD/DH 60/7

Amdt 1

Introduction of Increased Strength Seat Harness Transverse Cable

4/2001

Applicability: All DH 60 Series aircraft.

Requirement: Replace existing harness transverse cables with cables of higher strength in accordance with British Aerospace Mandatory TNS CT(Moth) No 37 Issue 2 dated 1 December 2000. Alternate cables of equivalent or greater strength to those required by TNS CT(Moth) No 37 Issue 2 are acceptable.

Note: UK CAA AD 002-10-2000 refers.

Compliance: Before 22 February 2002, unless already accomplished. This amendment becomes effective on 19 April 2001.

Background: Investigation in UK has shown that, under overload conditions, the initial point of failure of the harness assembly or attachments can be the shoulder harness transverse cable. This failure will result in total loss of upper body restraint for the seat occupant. The UK Air Accident Investigation Branch specifically recommended that the existing cable be replaced by one of higher strength.

Amendment 1 has been issued to permit alternate cables to those specified in the requirement document to be used.

The original issue of this Airworthiness Directive became effective on 22 February 2001.

Signature of David Alan Villiers Delegate of the Civil Aviation Safety Authority

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 26 February 2001

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 21 March 2001.

Page 1 of 1

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/DH 60/7 Amdt 1 - Introduction of Increased Strength Seat Harness Transverse Cable

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/DH 60/7 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

De Havilland DH 60 (Moth) Series Aeroplanes

AD/DH 60/7

Amdt 1

Introduction of Increased Strength Seat Harness Transverse Cable

4/2001

Applicability: All DH 60 Series aircraft.

Note: UK CAA AD 002-10-2000 refers.

Compliance: Before 22 February 2002, unless already accomplished. This amendment becomes effective on 19 April 2001.

Amendment 1 has been issued to permit alternate cables to those specified in the requirement document to be used.

The original issue of this Airworthiness Directive became effective on 22 February 2001.

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 26 February 2001

The above AD is notified in the Commonwealth of Australia Gazette on 21 March 2001.