Kelowna Flightcraft (General Dynamics/Co
Kelowna Flightcraft (General Dynamics/Convair) Series Aeroplanes
Kelowna Flightcraft (General Dynamics/Convair) Series Aeroplanes
| AD/CONVAIR/9 | Wing Front Spar Lower Caps | 5/2006 |
|---|
| Applicability: | Model 340 and 440 aircraft, and all such model aircraft converted to turbopropeller power. |
|---|---|
| Requirement: | 1. Accomplish, from the exterior of the wing, a visual inspection of both the left and right wing front spar lower caps in areas adjacent to each side of main landing gear drag strut attachment fittings for cracks.2. Gain access to the wing interior in the area specified in Requirement 1 by removing the lower wing skin access cover. Accomplish the Requirement 1 visual inspection.If cracks are found during any inspection, before further flight, repair in accordance with a scheme approved by the FAA or CASA.Note: FAA AD 73-07-01 Amdt 39-1608 refers. |
| Compliance: | 1. At each daily inspection, until the Requirement 2 inspection requirements are initiated.2. Within 100 hours time in service after 11 May 2006, unless already accomplished within the last 500 hours time in service, and thereafter at intervals not to exceed 600 hours time in service. |
| This Airworthiness Directive becomes effective on 11 May 2006. | |
| Background: | The FAA requires inspections to detect possible cracking in the wing front spar lower caps. |
View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority
29 March 2006