Kelowna Flightcraft (General Dynamics/Co
Kelowna Flightcraft (General Dynamics/Convair) Series Aeroplanes
Kelowna Flightcraft (General Dynamics/Convair) Series Aeroplanes
| AD/CONVAIR/3 | Supplemental Corrosion Inspection Program | 5/2006 |
|---|
| Applicability: | All Model 340, 440, and all such model aircraft converted to turbopropeller power. |
|---|---|
| Requirement: | Inspect in accordance with General Dynamics, Convair Division, “Supplemental Corrosion Inspection Document”, Document No. ZS-340-2000, dated February 1992.If corrosion is detected as a result of any inspection required by this Directive, before further flight, repair in accordance with General Dynamics/Convair Structural Repair Manual.Note: FAA AD 92-25-13 Amdt 39-8427 refers. |
| Compliance: | From the initial threshold specified in FAA AD 92-25-13, and not to exceed the applicable interval specified in the “initial” column of the schedule on pages 5-10-1 through 5-10-6 of Chapter 5 of the Requirement document. Thereafter repeat the inspections at intervals not to exceed the applicable interval specified in the “Follow-on” column of the schedule on pages 5-10-1 through 5-10-6 of the Requirement document. |
| This Airworthiness Directive becomes effective on 11 May 2006. | |
| Background: | The FAA requires certain inspections to prevent degradation of the structural capabilities of the aircraft due to problems associated with corrosion. |
View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority
29 March 2006