1AD/CFM56/12 - Accessory and Transfer Gearbox Replacement

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Image unavailable in extracted text
CFM International Turbine Engines - CFM56 Series

AD/CFM56/12 Accessory and Transfer Gearbox Replacement

6/98 TX

Applicability: CFM International (CFMI) CFM56-3, all models, turbofan engines with serial numbers as listed below (Warning: some engines may appear in more than one list):

List 1A: (First batch of CFM56-3 engines with suspect starter gearshaft (line 5) in the accessory gearbox): Engine Serial Number (ESN): 858619 to 858622, 858624, 858627 to 858635, 858638, 858640, 858641, 858644, 858647, 858657 (See Service

Bulletin CFM56-3/ -3B/ -3C S/B 72-863 revision 1).

List 1B: (Second batch of CFM56-3 engines with suspect starter gearshaft (line 5) in the accessory gearbox): ESN: 858639, 858642, 858643, 858646, 858648 to 858656,

858658, 858660, 858662 to 858665, 858670, 858671, 858673, 858676, 858678 (See

Service Bulletin CFM56-3/ -3B/ -3C S/B 72-863 revision 1).

List 2A: (CFM56-3 Engines with suspect 26 teeth input bevel gear (line 1) in the transfer gear box). ESN: 858568, 858571, 858576, 858624, 858625, 858630 to

858639, 858641 to 858643, 858646 to 858651, 858654 to 858657, 858660 to 858662,

858665 to 858668, 858673, 858687, 858688, 858701, 722201 (See Service Bulletin CFM56-3/ -3B/ -3C S/B 72-865).

List 2B: (CFM56-3 Engines with suspect 27 teeth output bevel gear (line 2) in the transfer gear box): ESN: 858635 to 858637, 858642, 858643, 858646, 858648,

858656, 858657, 858662, 858663, 858665 to 858669, 858671 to 858677, 858679 to

858681, 858684, 858686, 858688, 858689, 858691, 858700 (See Service Bulletin CFM56-3/ -3B/ -3C S/B 72-865).

List 3: (CFM56-3 engines with suspect intermediate gearshaft 44x73 teeth (line 9)in the accessory gearbox). ESN 858619 to 858622, 858624, 858627 to 858642, 858644

to 858652, 858654, 858657 to 858660, 858666, 858668. (See Service Bulletin CFM56-3/ -3B/ -3C S/B 72-873 Revision 1).

Requirement: 1. For all engines in Lists 1A, 1B, 2A and 2B above, check the AGB and TGB magnetic chip detector (MCD). If magnetic particles are found, remove the AGB and TGB from service in accordance with Service Bulletin CFM56-3/ -3B/ -3C S/B 72-A861 Revision 3.

2. For all engines in Lists 1A and 1B, remove from service the starter gearshaft in the AGB in accordance with Service Bulletin CFM56-3/ -3B/ -3C S/B 72-863 Revision 1.

3. For all engines in List 2A, remove from service the input bevel gearshaft in the TGB in accordance with Service Bulletin CFM56-3/ -3B/ -3C S/B 72-865.

4. For all engines in List 2B, remove from service the output bevel gearshaft in the TGB in accordance with Service Bulletin CFM56-3/ -3B/ -3C S/B 72-865.