CTHIn ForceLegislation
AD/CESSNA 750/6 - Roll Feel and Centering Bungee Assembly - Replacement
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
AD/CESSNA 750/6 - Roll Feel and Centering Bungee Assembly - Replacement
Start here
Turn the raw legal text into a practical explanation grounded in AD/CESSNA 750/6 - Roll Feel and Centering Bungee Assembly - Replacement.
| AD/CESSNA 750/6 | Roll Feel and CenteringBungee Assembly - Replacement | 4/2010 |
|---|
| Applicability: | Model 750 aeroplanes with serial numbers -0001 to -0053 inclusive. |
|---|---|
| Requirement: | In accordance with the technical requirements of FAA AD 98-05-02 Amendment39-10364 replace roll feel and centering bungee assembly with improved bungee assembly in accordance with Cessna Citation Service Bulletin 750-27-10 dated16 January 1998, including Supplemental Data to Service Bulletin 750-27-10 dated 16 January 1998. |
| Compliance: | Unless already accomplished in accordance with the Requirement documents, prior to issue of a Certificate of Airworthiness, or within 100 hours TIS from the effective date of this AD. |
| This Airworthiness Directive becomes effective on 2 March 2010. | |
| Background: | The FAA AD was prompted by reports of partial to full jamming of the aileron control circuit during flight. The action specified in the AD is intended to prevent the possibility of accumulation of ice on the aileron feel cartridge assembly shaft causing jamming of the aileron circuit and consequent reduced controllability of the aeroplane. |
Image unavailable in extracted text
Mike Higgins
Delegate of the Civil Aviation Safety Authority
24 February 2010