1AD/CESSNA 337/21 Amdt 1 - Pre-Certification Requirements - Modification

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Image unavailable in extracted text
Cessna 337 Series Aeroplanes

AD/CESSNA 337/21

Amdt 1

Pre-Certification Requirements - Modification 8/75

Applicability: All model 337G.

Requirement: Modify the aircraft in accordance with the requirements of ANO 101.22 in respect of the following:

a. Install placards clearly visible to the occupants of seat rows 1 and 2 specifying the periods during which smoking is prohibited.

Install a “NO SMOKING” placard clearly visible to the occupant/s of seat row 3.

2. Install and identify:

fuelling equipment bonding points at each fuel filling point.

external earthing points for the attachment of ground connections on each main undercarriage assembly or on the nose gear.

3. a. Modify the second row seat backrest locking pin P/No. 1514201-18 to permit the backrest to be pushed forward by the occupant/s of the third row seats when applying a forward force of 18 lb. to 22 lb. at the top of the backrest, to a scheme approved by the Secretary.

Note: Modification to ARCAV ALBURY drawing No. 20 issue 2 or Rex Aviation Ltd. Drawing No. RA-A-1390-1 is an acceptable means of compliance.

Install a placard on the rear of each second row seat backrest, clearly visible to the occupant/s of the third row seats, as follows:

IN EMERGENCY

PUSH CENTRE SEAT BACKREST FORWARD

Note: All lettering shall be in white on a black back- ground. Underlined lettering shall be a minimum of 6 mm (1/4") high and other lettering shall be a minimum of 3 mm (1/8") high.

4. Install an easily readable placard in a prominent position on the pilot”s instrument panel as follows:

“ENSURE CENTRE SEATS LATCHED DOWN BEFORE FLIGHT”.

5. a. The third row seat/s shall be positively attached to the cabin floor structure, with the seat/s firmly positioned against the cabin rear bulkhead lining, in accordance with a scheme approved by the Secretary.

Note: Modification to Rex Aviation Ltd., Drawing No. RA-C-1341 or Arcav Albury Drawing No. 20 Issue 2 is an acceptable means of compliance.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

The third row seat backrest/s shall be positively attached to the seat base by modifying the assembly in accordance with a scheme approved by the Secretary.