Commonwealth legislation

AD/CESSNA 310/55 Amdt 1 - Seat Back Reinforcing Strap

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires owners/operators of Cessna 310 aeroplanes (serials 310Q0201–310R2140) to carry out the actions specified in Cessna MEB 89‑3 Revision 1 (dated 12 Oct 1990) by 22 May 2001 (Requirement; Compliance). CASA’s delegate issued the AD under subregulation 39.1(1); the compliance cost and practical work (inspections or minor modifications) fall to the aircraft owners/operators and may include confirming correct strap-retaining pin size (Background).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/CESSNA 310/55 Amdt 1 - Seat Back Reinforcing Strap.

AD/CESSNA 310/55 Amdt 1 - Seat Back Reinforcing Strap

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
View image in the official source
Cessna 310 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/CESSNA 310/55 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/CESSNA 310/55

Amdt 1

Seat Back Reinforcing Strap 3/2001

Applicability: Model 310 aircraft with serial numbers 310Q0201 to 310R2140.

Requirement: Action in accordance with Cessna MEB 89-3 Revision 1, dated 12 October 1990. Compliance: Before 22 May 2001, unless already accomplished.

This amendment becomes effective on 22 March 2001.

Background: In Australia there was a short history of seat back failure in the affected aircraft. The most recent being a total failure in IMC conditions, which in normal single pilot operation would have resulted in total loss of control near the ground.

Amendment 1 is raised in response to administrative oversight by introducing Revision 1 of the Requirement document. This amendment does not present any new technical requirements, although a check may be required to confirm the correct size strap retaining pins have been installed.

The original issue of this Airworthiness Directive became effective on 1 April 1993.

View image in the official source

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 8 February 2001

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 21 February 2001.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/CESSNA 310/55 Amdt 1 - Seat Back Reinforcing Strap

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Cessna 310 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/CESSNA 310/55 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/CESSNA 310/55

Amdt 1

Seat Back Reinforcing Strap 3/2001

Applicability: Model 310 aircraft with serial numbers 310Q0201 to 310R2140.

Requirement: Action in accordance with Cessna MEB 89-3 Revision 1, dated 12 October 1990. Compliance: Before 22 May 2001, unless already accomplished.

This amendment becomes effective on 22 March 2001.

The original issue of this Airworthiness Directive became effective on 1 April 1993.

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 8 February 2001

The above AD is notified in the Commonwealth of Australia Gazette on 21 February 2001.