AIRWORTHINESS DIRECTIVE AIRWORTHINESS DIRECTIVE

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Cessna 206 Series Aeroplanes

AD/CESSNA 206/59 KAP 140 Autopilot Syste AD/CESSNA 206/59 KAP 140 Autopilot System 10/2004

AD/CESSNA 206/59 KAP 140 Autopilot System 10/2004

Applicability: Cessna 206H and T206H model aeroplanes listed below that are equipped with a Honeywell KAP 140 autopilot computer system, part number (P/N) 065-00176-2501, 065-00176-5001, 065-00176-5101 or 065-00176-5201, all serial numbers.

Model Model

Model

206H T206H

Serial Numbers Serial Numbers

Serial Numbers

20608001 through 20608183, 20608185, 20608187 and 20608188 T20608001 through T20608039, T20608041 through T20608367, T20608369 through T20608379, T20608381, T20608382 and T20608385

Cessna 206 Series Aeroplanes Cessna 206 Series Aeroplanes

Cessna 206 Series Aeroplanes

AD/CESSNA 206/59 (continued)

Background: The United States Federal Aviation Administration (FAA) has received reports of inadvertent and undetected engagement of the autopilot system in Cessna Models 172R, 172S, 182S, 182T, T182T, 206H, and T206H aeroplanes. These aeroplanes are equipped with a Honeywell KAP 140 autopilot computer system installed in the centre instrument control panel near the throttle.

However, when issuing AD 2003-24-13 the FAA inadvertently omitted four part numbers from the applicability that was reflected in AD/CESSNA 206/58 Amdt 2. This Directive, whilst not superseding AD/CESSNA 206/58 Amdt 2, complements that Directive by listing the omitted KAP 140 autopilot computer system part numbers.

This Directive requires the installation of an update to the operating software of the KAP 140 autopilot computer system. This action is intended to prevent unintentional engagement of the KAP 140 autopilot computer system, which could cause the pilot to take inappropriate actions.