Commonwealth legislation

AD/CESSNA 206/3 Amdt 3 - Wing Rear Spar

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

Requires owners/operators of Cessna 206 aeroplanes fitted with the listed early rear-spar part numbers to visually inspect the wing rear-spar web for fatigue cracking at the root attachment and upper flange, using at least 4X magnification (or equivalent). Inspections must occur within 500 hours after 25 January 1990 and every 500 hours thereafter. Amendment 3 narrows applicability to those early part numbers and extends the inspection interval to 500 hours, citing reports of cracks including a fatal accident.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/CESSNA 206/3 Amdt 3 - Wing Rear Spar.

AD/CESSNA 206/3 Amdt 3 - Wing Rear Spar

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Cessna 206 Series Aeroplanes

AD/CESSNA 206/3

Amdt 3

Wing Rear Spar 1/90

Applicability: All models fitted with rear spar assembly P/N 1220050-1, -2, -23, -24, -25 or -26.

Note: These part numbers are in aircraft serial numbers 206-0001 to 206-0275, U206-0276 to U206-1367, and P206-0001 to P206-0597; excepting of course those aircraft that have had rear spar assemblies replaced with later part numbers.

Requirement: Visually inspect each main plane rear spar web for fatigue cracking at the root attachment area and the upper flange of the rear spar channel at the outer end of the attachment fittings. These cracks originate in the radius which is located beneath the attachment fittings. This inspection shall be carried out using a magnifying glass of at lease 4X magnification or alternatively, a device such as the “Syte Ade” may be employed. Since the trailing edge root end rib fits closely to the spar, it may be difficult to detect possible cracks, therefore, where doubt exists, the trailing edge root end rib shall be removed for more detailed inspection.

Note: The affected area is illustrated in Rex Aviation Technical Memorandum No. 12 dated 10 May 1960.

Compliance: Within 500 hours time in service after 25 January 1990, and thereafter at intervals not exceeding 500 hours time in service.

Background: There have been several reports of cracks in the rear spar near the attachment fitting, including at least one fatal accident, in another model that uses a similar design of spar assembly.

The problem seems to be confined to the early design rear spars. Later spars have a thicker web and additional doublers. Amendment 3 changes the applicability of this Directive to clarify that only the early part number rear spars need to be inspected.

The inspection interval has been extended to 500 hours based on service experience.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/CESSNA 206/3 Amdt 3 - Wing Rear Spar