CTHIn ForceLegislation
AD/CESSNA 170/76 - Flight Control System - 2
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
AD/CESSNA 170/76 - Flight Control System - 2
Start here
Turn the raw legal text into a practical explanation grounded in AD/CESSNA 170/76 - Flight Control System - 2.
| AD/CESSNA 170/76 | Flight Control System - 2 | 5/2005 DM |
|---|
| Applicability: | Model 172R aircraft, serial numbers 17281234 through 17281236.Model 172S aircraft, serial numbers 172S9774 through 172S9776, 172S9778 through 172S9781, 172S9783, 172S9784, 172S9786, 172S9788 through 172S9791, and 172S9793. |
|---|---|
| Requirement: | Accomplish a one-time detailed inspection of the flight control system, and correct installations that do not conform to type design. Inspect by following Chapter 5, TIME LIMITS/MAINTENANCE CHECKS, of the Model 172 Maintenance Manual using the List of Effective Pages dated 7 June 2004.Before further flight, repair any damage found during inspection.Special Flight Permits may not be issued to allow flight before this AD has been complied with, even to reposition for compliance with this directive. If the inspection cannot be carried out at the aircraft’s current location, contact Cessna.Note: FAA Emergency AD 2005-05-53 R1 refers. |
| Compliance: | Before further flight after 14 March 2005. |
| This Airworthiness Directive becomes effective on 14 March 2005. | |
| Background: | The FAA has been notified that inadequate or incorrect flight controls rigging may exist on recently produced Cessna Models 172R and 172S aircraft. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
10 March 2005