AD/CESSNA 170/44 - Limited Elevator Movement - Placard
1AD/CESSNA 170/44 - Limited Elevator Movement - Placard
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/CESSNA 170/44 - Limited Elevator Movement - Placard.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Cessna 170, 172, F172, FR172 and 175 Series Aeroplanes
AD/CESSNA 170/44 Limited Elevator Movement - Placard 9/81
Applicability: All model 172 RG with S/Nos 172 RG 0001 to 172 RG 0769.
Requirement: 1. Install a locally manufactured placard in clear view of the pilot, using letters at least 2.4 mm (3/32 inch) high, which reads:
“ELEVATOR MOVEMENT MAY BE LIMITED WHEN RIGHT RUDDER IS APPLIED IF THIS CONDITION IS ENCOUNTERED, CENTER THE RUDDER PEDALS, LAND AS SOON AS PRACTICAL AND COMPLY WITH AD/CESSNA 170/45 PRIOR TO FURTHER FLIGHT.”
- Remove placard after compliance with AD/CESSNA 170/45.
Note: FAA AD 81-14-06 Amdt 39-4158 and Cessna Single Engine Service Letter SE80-99 Rev 1 refer to this subject.
Compliance: Before further flight.
Background: In-service failure of the jack screw shaft of the rudder trim/nose gear steering bungee could limit elevator control system movement and for safety, the aircraft should land as soon as practicable after the pilot experiences elevator control limited movement.