AD/CERES/4 Amdt 1 - Mixture Control Lever Quadrant - Modification
1AD/CERES/4 Amdt 1 - Mixture Control Lever Quadrant - Modification
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/CERES/4 Amdt 1 - Mixture Control Lever Quadrant - Modification.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
C.A.C. CA-28 (Ceres) Series Aeroplanes
AD/CERES/4
Amdt 1
Mixture Control Lever Quadrant - Modification 9/99
Applicability: All models.
Requirement: Mark or remark the mixture control lever quadrant to indicate clearly the following positions:
(a) The minimum lean position \- to be designated “LEAN”.
(b) The rearmost position \- to be designated “CUT OFF”.
This minimum lean position of the mixture control lever is the rearmost position it can reach without operating the idle cut off valve.
Note: Modifications performed in accordance with AD/CA-28/4 satisfy the requirements of this Directive.
Compliance: Forthwith.
This Amendment becomes effective on 9 September 1999.
Background The original issue of this Airworthiness Directive became effective in Issue AL 2/64.