CTHIn ForceLegislation
AD/CAP 10/9 - Ailerons Spade Supports
Avions Mudry Cap Series AeroplanesAvions Mudry Cap Series Aeroplanes
Start here
Get a plain-English read of Avions Mudry Cap Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/CAP 10/9 - Ailerons Spade Supports.
Avions Mudry Cap Series Aeroplanes
| AD/CAP 10/9 | Ailerons Spade Supports | 5/2005 DM |
|---|
| Applicability: | Model CAP 10B aircraft, serial number 300 and subsequent; and all aircraft below serial number 300 with modification 000302 incorporated (carbon fibre spar - CAP 10C wing). |
|---|---|
| Requirement: | Inspect the aileron spade supports in accordance with APEX Aircraft Service Bulletin No. 040401, dated October 2004, or a later EASA approved revision.If cracking is evident during any inspection, before further flight, replace affected spade support with a new design spade support.Note 1: Aileron spade supports with the letter “A” in the identification marking are not affected by the inspection requirements of this Directive.Note 2: DGAC AD F-2005-049 refers. |
| Compliance: | Unless the initial inspection is already accomplished, within 10 flight hours after 4 April 2005. Inspect thereafter at intervals not to exceed 55 flight hours.Note: Installation of a new design spade support constitutes terminating action for the repeat inspection requirement for that spade support position. |
| This Airworthiness Directive becomes effective on 4 April 2005. | |
| Background: | Reports were received of cracked aileron spade supports on in-service aircraft. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
31 March 2005