CTHIn ForceLegislation
AD/BELL 222/34 Amdt 1 - Tail Rotor Counterweight Bellcrank
Bell Helicopter Textron Canada (BHTC) 22Bell Helicopter Textron Canada (BHTC) 222 Series Helicopters
Start here
Get a plain-English read of Bell Helicopter Textron Canada (BHTC) 22
Turn the raw legal text into a practical explanation grounded in AD/BELL 222/34 Amdt 1 - Tail Rotor Counterweight Bellcrank.
Bell Helicopter Textron Canada (BHTC) 222 Series Helicopters
| AD/BELL 222/34 Amdt 1 | Tail Rotor Counterweight Bellcrank | 9/2007 |
|---|
| Applicability: | Model 222 helicopters, serial numbers 47006 through 47089.Model 222B helicopters, serial numbers 47131 through 47156.Model 222U helicopters, serial numbers 47501 through 47574.Model 230 helicopters, serial numbers 23001 through 23038. |
|---|---|
| Requirement: | 1. Identify the part number of the tail rotor counterweight bellcrank installed on the helicopter and proceed as follows:If part number 222-012-727-003 is installed, proceed to Requirement 3.If part number 222-012-727-105 without the prefix letters is installed, proceed to Requirement 2.Note 1: Part number 222-012-727-105, with the added prefix letters inscribed on the part before the serial number, satisfies the requirement of this Directive.2. Inspect the tail rotor counterweight bellcrank in accordance with Part I of Bell Helicopter Textron Canada Alert Service Bulletin (ASB) 222-04-101 Revision B, for Models 222 and 222B, Part I of ASB 222U-04-72 Revision B, for Model 222U, and Part I of ASB 230-04-32 Revision B, for Model 230.3. Remove from service, tail rotor counterweight bellcrank part numbers222-012-727-003 and 222-012-727-105 (without prefix letters), in accordance with the following Alert Service Bulletin:Models 222 and 222B helicopters with the following bellcranks:- Part number 222-012-727-105 bellcranks installed; in accordance with Part II of ASB 222-04-101 Revision A.- Part number 222-012-727-003 bellcranks installed; in accordance with ASB 222-04-99 Revision B. |
| Model 222U helicopters with the following bellcranks:- Part number 222-012-727-105 bellcranks installed; in accordance with Part II of ASB 222U-04-72 Revision A.- Part number 222-012-727-003 bellcranks installed; in accordance with ASB 222U-04-70 Revision B.Model 230 helicopters with the following bellcranks:- Part number 222-012-727-105 bellcranks installed; in accordance with Part II of ASB 230-04-32 Revision B.- Part number 222-012-727-103 bellcranks installed; in accordance with ASB 230-04-30 Revision C.Note 2: Transport Canada AD CF-2005-27R1 refers. | |
|---|---|
| Compliance: | 1. Within 10 flight hours after 19 August 2005.2. Within 10 flight hours after 19 August 2005. Repeat thereafter at intervals not to exceed 50 flight hours, until compliance with Requirement 3.3. Unless already accomplished, before 30 September 2007.The compliance times for Requirements 1 and 2 remain unchanged by this issue of the Directive. |