Commonwealth legislation

AD/BELL 212/61 - Main Hydraulic Servo Actuator Rod End Lock Washer

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This Airworthiness Directive requires owners/operators of Bell 212 helicopters fitted with hydraulic servo actuator P/No 41000470 (serials with “HR” up to 10010) to inspect the rod-end lock washer for bending/twisting and to replace the NAS513-6 washer with NAS513K6C if directed (Requirement). CASA (the delegate acting under subregulation 39.1(1)) sets compliance deadlines of 25 and 100 flight hours and requires work to follow the Bell Service Bulletin instructions; operators pay for inspection, repair and scheduling costs (Compliance; Requirement).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BELL 212/61 - Main Hydraulic Servo Actuator Rod End Lock Washer.

AD/BELL 212/61 - Main Hydraulic Servo Actuator Rod End Lock Washer

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
View image in the official source
Bell Helicopter Textron 212 Series Helicopters

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/BELL 212/61 Main Hydraulic Servo Actuator

Rod End Lock Washer

9/2001

Applicability: Model 212 helicopters incorporating hydraulic servo actuator, part number (P/No) 41000470, serial numbers with “HR’ prefix up to and including 10010.

Requirement: 1. Inspect the tab on the rod end locking washer of each hydraulic servo actuator for bending and twisting in accordance with “Accomplishment Instructions”, Paragraph 2.A of Bell Helicopter Textron, Inc Service Bulletin 212-00-109.

Replace P/No NAS513-6 lock washer with P/No NAS513K6C locking device in accordance with “Accomplishment Instructions”, Paragraph 2.B of Bell Helicopter Textron, Inc Service Bulletin 212-00-109.

Note: FAA AD 2001-08-04 refers.

Compliance: 1. Within 25 flight hours after the effective date of this Airworthiness Directive.

Within 100 flight hours after the effective date of this Airworthiness Directive or at next actuator overhaul, whichever occurs first.

This Airworthiness Directive becomes effective on 25 July 2001.

Background: This Directive is prompted by reports of damaged main hydraulic actuator rod end lock washers which can result in rod end disengagement from the actuator and potential for loss of control of the main rotor.

View image in the official source

James Coyne

Delegate of the Civil Aviation Safety Authority 18 July 2001

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 25 July 2001.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BELL 212/61 - Main Hydraulic Servo Actuator Rod End Lock Washer

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Bell Helicopter Textron 212 Series Helicopters

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/BELL 212/61 Main Hydraulic Servo Actuator

Rod End Lock Washer

9/2001

Applicability: Model 212 helicopters incorporating hydraulic servo actuator, part number (P/No) 41000470, serial numbers with “HR’ prefix up to and including 10010.

Replace P/No NAS513-6 lock washer with P/No NAS513K6C locking device in accordance with “Accomplishment Instructions”, Paragraph 2.B of Bell Helicopter Textron, Inc Service Bulletin 212-00-109.

Note: FAA AD 2001-08-04 refers.

Compliance: 1. Within 25 flight hours after the effective date of this Airworthiness Directive.

Within 100 flight hours after the effective date of this Airworthiness Directive or at next actuator overhaul, whichever occurs first.

This Airworthiness Directive becomes effective on 25 July 2001.

James Coyne

Delegate of the Civil Aviation Safety Authority 18 July 2001

The above AD is notified in the Commonwealth of Australia Gazette on 25 July 2001.