AD/BELL 212/25 Amdt 4 - Main Rotor Yoke
1AD/BELL 212/25 Amdt 4 - Main Rotor Yoke
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/BELL 212/25 Amdt 4 - Main Rotor Yoke.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Bell Helicopter Textron 212 Series Helicopters
AD/BELL 212/25
Amdt 4
Main Rotor Yoke 9/91
Applicability: All helicopters fitted with main rotor yoke P/N 204-011-102- (all dash numbers).
Requirement: 1. Inspect the main rotor yoke in-situ in accordance with the Accomplishment Instructions in Bell Alert SB No 212-90-60, Revision A, dated 31 August 1990.
- Remove the yoke assembly from the main rotor hub assembly and inspect the yoke in accordance with FAA AD 79-20-05, Amendment 39-3662.
Compliance: As detailed in the Requirement Documents.
Background: Amendment 3 implemented the additional inspections of ASB 212-87-48, which was issued as a result of fatigue cracks being found in service. It required that visual inspections of the main rotor yoke be performed daily and every 1200 hours/24 months. These are additional to the more detailed 2400 hourly inspection specified in FAA AD 79-20-05.
Amendment 4 specifies Bell Alert SB 212-90-60, which supersedes ASB 212-87-48, and adds a yoke spindle inspection to Part III, required at 1200 hours/24 month intervals. Inspections done to earlier amendments may be considered for the purposes of determining when amendment 4 inspections are due.