CTHIn ForceLegislation
AD/BELL 206/164 - Vertical Fin Supports - Inspection
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
AD/BELL 206/164 - Vertical Fin Supports - Inspection
Start here
Turn the raw legal text into a practical explanation grounded in AD/BELL 206/164 - Vertical Fin Supports - Inspection.
| AD/BELL 206/164 | Vertical Fin Supports - Inspection | 11/2006 |
|---|
| Applicability: | Agusta model AB206A and AB206B helicopters equipped with vertical fin supports Part Number 206-031-417-3/-7 or 206-031-418-1/-5. |
|---|---|
| Requirement: | Inspect the vertical fin supports Part Number 206-031-417-3/-7 or 206-031-418-1/-5 (depending on the components installed) in accordance with the instructions contained in Agusta Bolletino Tecnico 206-240.Note: EASA AD 2006-0275 refers. |
| Compliance: | At or before the next scheduled 100 hourly inspection or annual inspection (whichever first), but no later than 3 months from the effective date of this AD. |
| This Airworthiness Directive becomes effective on 26 October 2006. | |
| Background: | There has been a report of an in flight separation of the vertical fin due to the failure of the fin supports. The preliminary analysis revealed that the failure (cracking) originated at the fin support attachment bolt holes. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
14 September 2006