Commonwealth legislation

AD/BELL 206/139 - Main Rotor Blades Part Number 206-010-200-33

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This directive orders owners/operators of certain Agusta-Bell 206A/B helicopters fitted with main rotor blades P/N 206-010-200-33 (specified serial-number ranges) to perform non‑destructive inspections following Agusta Bollettino Tecnico 206-229 (13 July 1998). It responds to a reported internal spar scratch on a removed blade. Inspections are required before further flight after 7 August 1998, repeated at intervals not exceeding 10 flight hours until the next-stage inspection (required by 30 November 1998), with subsequent checks as the service document specifies.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BELL 206/139 - Main Rotor Blades Part Number 206-010-200-33.

AD/BELL 206/139 - Main Rotor Blades Part Number 206-010-200-33

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters

AD/BELL 206/139 Main Rotor Blades Part Number

206-010-200-33

11/98

Applicability: All Agusta-Bell AB.206A and AB.206B helicopters equipped with main rotor blades part number 206-010-200-33 with a serial number in the range M3-1501 through M3- 2057 and EM-0001 through EM-0154.

Requirement: Inspect in accordance with Agusta Bollettino Tecnico 206-229, dated 13 July 1998.

Note: RAI AD 98-257 refers.

Compliance: Unless the Part I inspection is already accomplished, before further flight after 7 August 1998, and thereafter at intervals not to exceed 10 hours time in service until Part II compliance. Before 30 November 1998 for the Part II inspection, and thereafter as specified in the Requirement document for the Part III inspection.

This airworthiness directive becomes effective on 7 August 1998.

Background: A report was received of the presence of scratches inside the spar of a main rotor blade between STA 2185 and STA 2855, on a time expired blade that had been removed from service. This Directive requires certain NDI inspections on the upper and lower sides of an affected main rotor blade.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BELL 206/139 - Main Rotor Blades Part Number 206-010-200-33