Commonwealth legislation

AD/BELL 205/6 - Cyclic Control Supports - Inspection

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

2/10 complexity

Owners/operators of Bell 205A and 205A‑1 helicopters (unless modified to approved standards) must perform recurring inspections of the cyclic control supports to detect wear or cracks. The first check is within 100 flight hours after 20 February 1970 and then every 100 hours, using the procedures in Bell Service Letter No. 205A‑43. This prevents loss of control from failed control‑stick supports.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BELL 205/6 - Cyclic Control Supports - Inspection.

AD/BELL 205/6 - Cyclic Control Supports - Inspection

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Bell Helicopter Textron 205 Series Helicopters

AD/BELL 205/6 Cyclic Control Supports - Inspection 2/70 Applicability: All 205A and 205A-1 models not modified to a standard acceptable to the Secretary. Document: Bell SL No. 205A-43.

Compliance: Within 100 hours time in service after 20 February 1970 and thereafter at intervals not exceeding 100 hours time in service.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.