AD/BEECH 90/78 Amdt 2 - Rudder Pedal Arms
1AD/BEECH 90/78 Amdt 2 - Rudder Pedal Arms
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/BEECH 90/78 Amdt 2 - Rudder Pedal Arms.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Beechcraft 90 and 65-90 (King Air) Series Aeroplanes
AD/BEECH 90/78
Amdt 2
Rudder Pedal Arms 4/95
Applicability: All models fitted with rudder pedal arms P/N 50-524326, all dash numbers.
Requirement: Inspect the upper portion of each rudder pedal arm for cracks, using the fluorescent dye penetrant method in accordance with CAO 108.10. The area to be inspected includes the upper part of the “I” section shank, the hollow crossbar and the brake pedal attachment lugs. Particular attention must be paid to the fillet radii and holes.
Compliance: 1. Initially inspect before the issue of the next maintenance release after 31 October 1987. Re-inspect at intervals not to exceed 12 months.
- Inspect before flight if the aircraft has been parked for more than 3 months with the rudder pedals locked.
Note: The Maintenance Manual prohibits towing with the rudder pedals locked. This practice may also cause premature cracking.
Background: A review of cracked rudder pedals suggests that the primary cause of cracking is wind loads when the aircraft is parked on the ground with the rudder pedals locked, normal operating loads being a secondary factor. The inspection interval is now based on calendar time, special provision is made for aircraft parked in the open for long periods and a warning has been added about correct towing practice.