Commonwealth legislation

AD/BEECH 90/74 - Ansair Passenger Seats - Inspection

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

2/10 complexity

This airworthiness directive mandates a safety inspection for specific Beechcraft King Air aircraft. If you operate a Beechcraft 90 or 65-90 series aeroplane fitted with Ansair passenger seats, you must check whether the seats located directly above the wing spar carry-through structure display the part number G417-00-001.

What you need to do:

Inspect the passenger seats positioned over the wing spar to verify they bear the correct part number
Replace any seat assembly that does not show part number G417-00-001 with an approved alternative bearing the correct identification

Deadline: Complete this inspection within 100 flight hours after 31 January 1985, or during the next scheduled maintenance check after that date—whichever comes later.

This directive ensures the structural integrity of seats installed in a critical load-bearing area of the aircraft fuselage.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BEECH 90/74 - Ansair Passenger Seats - Inspection.

AD/BEECH 90/74 - Ansair Passenger Seats - Inspection

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source Beechcraft 90 and 65-90 (King Air) Series Aeroplanes

AD/BEECH 90/74 Ansair Passenger Seats - Inspection 1/85

Applicability: All models equipped with Ansair passenger seats.

Requirement: 1. Inspect passenger seats over the wing spar carry-through location for correct part number G417-00-001.

Replace any seat assembly not bearing part number G417-00-001 with an approved seat identified with the correct page number.

Compliance: Within 100 hours’ time in service after 31 January 1985 or at the next scheduled inspection for Maintenance Release issue after 31 January 1985, whichever is the later.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.