Commonwealth legislation

AD/BEECH 55/80 Amdt 1 - Cabin Window Lower and Upper Longerons

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

What it does: This airworthiness directive orders owners/operators of specified Beechcraft 58P/58PA aeroplanes (serial numbers listed in Beech SB 2630 or Raytheon SB 2691 Rev 1) to inspect and, if needed, reinforce or repair the cabin window upper and lower longerons in accordance with the named service bulletins.

Who pays and why it matters: Operators must complete the mandated inspections/repairs within 100 flight hours and follow the service-bulletin instructions; they bear the time and repair costs and have limited regulatory discretion because the AD prescribes the required actions (Requirement; Compliance).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BEECH 55/80 Amdt 1 - Cabin Window Lower and Upper Longerons.

AD/BEECH 55/80 Amdt 1 - Cabin Window Lower and Upper Longerons

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Beechcraft 55, 58 and 95-55 (Baron) Series Aeroplanes

AD/BEECH 55/80

Amdt 1

Cabin Window Lower and Upper Longerons 11/97

Applicability: Models 58P and 58PA aircraft having serial numbers listed in Beechcraft (Beech) Service Bulletin (SB) 2630 or Raytheon SB 2691 Revision 1.

Note: Revision 1 of Raytheon SB 2691 was issued to add serial numbers that were inadvertently omitted from the original issue (now TJ-2 through TJ-121).

Requirement: 1. For aircraft applicable to Raytheon SB 2691 Revision 1:

Inspect and reinforce in accordance with Raytheon Aircraft Mandatory SB 2691.

2. For aircraft applicable to Beech SB 2630:

Inspect the cabin window upper longeron (next to the upper aft splice) between the second and third right hand cabin side windows for cracks and missing rivets in accordance with the Accomplishment Instructions section of Beech SB 2630:

If cracks are found in the upper longeron, repair the cracks in accordance with the Accomplishment Instructions section of Beech SB 2630.

b. If rivets are found missing, install the rivets in accordance with the Accomplishment Instructions section of Beech SB 2630.

Note: FAA AD 97-09-09 Amdt 39-10005 refers.

Compliance: 1. Within 100 hours’ time in service after 5 December 1996.

Unless already accomplished, within 100 hours’ time in service after 9 October 1997.

The compliance of the initial issue of this Directive remains unchanged as Compliance 1 of this issue.

Background: The FAA received reports of cracks in the upper and lower longeron near the second right hand cabin window, and missing rivets that are supposed to secure the frame, splice, and longeron together. The actions specified by this Directive are intended to prevent structural cracking to the cabin, which could result in structural failure of the fuselage and loss of the aircraft.

Amendment 1 is issued in response a new FAA AD which combines the requirements of the initial issue of this Directive with additional requirements at the same location.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BEECH 55/80 Amdt 1 - Cabin Window Lower and Upper Longerons