Commonwealth legislation

AD/BEECH 36/19 - Internally Lighted Altimeter

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This AD requires urgent checks and corrective action on certain internally lighted altimeters installed in specific Beechcraft Bonanza (36 series and listed A36 serials) produced/installed between Sept 1, 1972 and Aug 1, 1973. A design fault can let the barometric adjustment knob disengage from the altitude hands, producing false altitude indications. Owners must inspect and either replace faulty units or perform preflight checks until replacement to prevent in‑flight altitude errors.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BEECH 36/19 - Internally Lighted Altimeter.

AD/BEECH 36/19 - Internally Lighted Altimeter

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Beechcraft 36 (Bonanza) Series Aeroplanes

AD/BEECH 36/19 Internally Lighted Altimeter 10/73

Applicability: All models with internally lighted altimeters supplied as spares ex Beech Wichita between 1 September 1972 and 1 August 1973 and model A36 with S/Nos. E-368 to E-460.

Requirement: 1. Prior to next flight visually inspect the internally lighted altimeters. If the locking stud screw is located above and to the left of the barometric scale adjustment knob, no further inspection or replacement is necessary.

If the locking stud screw is located below and to the right of the barometric adjustment knob, replace the instrument within 50 hours time in service after

17 October 1973. Until replacement is accomplished check the altimeter prior to each flight as follows:

Rotate barometric scale adjustment knob while applying outward finger pressure to ensure the elevation hands do not disengage from the barometric scale.

Disengagement will be readily recognised by the knob snapping outward and the elevation hands will not move when the barometric scale is rotated. If disengagement occurs, replace the altimeter with a 58-380045-3 millibars scale 35,000 feet altimeter, or an equivalent. All future altimeters will have locking stud screws above and to the left of the adjusting knob as in 1 above.

Note: Until replacement altimeters are installed forward pressure should be exerted on the knob whenever changing barometric settings.

Compliance: As detailed in Requirement document.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BEECH 36/19 - Internally Lighted Altimeter