AD/BEECH 35/64 - Pilot and Copilot Shoulder Harness
1AD/BEECH 35/64 - Pilot and Copilot Shoulder Harness
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/BEECH 35/64 - Pilot and Copilot Shoulder Harness.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Beechcraft 35 (Bonanza) Series Aeroplanes
AD/BEECH 35/64 Pilot and Copilot Shoulder Harness 12/91
Applicability: Model V35B, with serial numbers D-9862 through D-10403.
Requirement: Action IAW the Technical Requirements of FAA AD 91-18-19, Amdt 39-8022.
Note: Beechcraft MSB 2394 refers.
Compliance: As specified in the Requirement Document with a revised effective date of 12 December 1991 for Australian registered aircraft.
Background: Improper washers may have been installed in the pilot and copilot shoulder harness “D” ring of the affected aircraft. The actions specified in this AD are intended to prevent a malfunctioning shoulder harness that could result in occupant injury during an emergency situation. The effective date required by the FAA is extended by approximately two months.