AD/BEECH 200/60 - Engine Fire Detector Wiring
1AD/BEECH 200/60 - Engine Fire Detector Wiring
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/BEECH 200/60 - Engine Fire Detector Wiring.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Beechcraft 200 (Super King Air) Series Aeroplanes
AD/BEECH 200/60 Engine Fire Detector Wiring 8/98
| Applicability: | Model | Serial Numbers |
|---|---|---|
| B200 | BB-1439, BB-1444, through BB-1447 inclusive, BB-1449, BB-1450, BB-1452, BB1453, BB-1455, BB-1456 andBB-1458 through BB-1512 inclusive. | |
| B200C | BL-139 and BL-140 | |
| B200C (C-12R) | BW-1 through BW-5 inclusive. | |
| B200T | BT-35 through BT-38 inclusive. |
Requirement: Replace the existing engine fire protection system wiring with fire resistant wiring by incorporating Engine Fire Detector Harness Kit part number 101-3208-1. This replacement is to be accomplished in accordance with the instructions included with the kit, as referenced in Raytheon Mandatory Service Bulletin No 2701 issued May 1997.
Note: FAA AD 98-10-05 Amdt 39-10516 refers.
Compliance: Within 200 hours time in service after the effective date of this directive.
This airworthiness directive becomes effective on 16 July 1998.
Background: This directive requires replacement of the wiring for the engine fire detector system with fire resistant wiring. The directive resulted from a discovery during aircraft production of the potential for the existing fire detector system wiring to fail because of high heat or fire. Replacement of the wiring is intended to prevent possible failure of the engine fire detector system to provide an engine fire annunciation in the cockpit.