Commonwealth legislation

AD/BEECH 1900/20 Amdt 1 - Airstair Door Handle and Latch Housing

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires operators of specified Beechcraft 1900 serial-numbered aircraft to install lubrication fittings in the airstair door handle and latch housing following Raytheon Service Bulletin 2572. The intent is to stop moisture collecting and freezing in the door housing, which could jam the airstair and block evacuation. The work must be done within 100 flight hours from 15 July 1999; aircraft operators pay for parts and labour and must use the specified Raytheon service instructions.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BEECH 1900/20 Amdt 1 - Airstair Door Handle and Latch Housing.

AD/BEECH 1900/20 Amdt 1 - Airstair Door Handle and Latch Housing

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Beechcraft 1900 Series Aeroplanes

AD/BEECH 1900/20

Amdt 1

Airstair Door Handle and Latch Housing 7/99

Applicability: Model Serial Numbers 1900 UA-1 through UA-3

1900C UB-1 through UB-74, and UC-1 through UC-174

1900D UE-1 through UE-157

Requirement: Install lubrication fittings in the airstair door handle and latch housing mechanisms in accordance with the Accomplishment Instructions section of either Raytheon Mandatory Service Bulletin (MSB) 2572 Issued July 1996, or Raytheon MSB 2572 Issued July 1996, Revision No.1, May 1998.

Note 1: Only Part II of the Accomplishment Instructions section of the Requirement document(s) applies to the affected Model 1900D aircraft.

Note 2: FAA AD 97-15-13 R2 Amdt 39-11129 refers.

Compliance: Unless already accomplished, within 100 hours time in service after 15 July 1999.

This Amendment becomes effective on 15 July 1999.

Background: The actions specified by this Directive are intended to prevent moisture from accumulating and freezing in the airstair door housing, which could result in the door freezing shut and the passengers not being able to evacuate the aircraft in an emergency situation.

Amendment 1 is issued in response to a revision of the related FAA AD which introduces revised applicable service information that corrects the number of required parts and changes an incorrect maintenance manual reference.

The original issue of this Airworthiness Directive became effective on 6 November 1997.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BEECH 1900/20 Amdt 1 - Airstair Door Handle and Latch Housing