Commonwealth legislation

AD/BAe 146/77 Amdt 3 - Pylon to Wing Forward Attachment Bolts

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires operators of all BAe 146 and Avro 146‑RJ aircraft to inspect and, if necessary, repair or re‑protect the engine pylon‑to‑wing forward attachment bolts in accordance with BAe Systems Mandatory Service Bulletin SB 54‑010 (Revision 1 or 2). Operators must check aircraft technical records for modifications HCM01649A/HMC01649B and meet conditional deadlines tied to aircraft age and flight count; the CASA delegate enforces the requirement.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BAe 146/77 Amdt 3 - Pylon to Wing Forward Attachment Bolts.

AD/BAe 146/77 Amdt 3 - Pylon to Wing Forward Attachment Bolts

View image in the official source

View image in the official source
AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/BAe 146/77 Amdt 2 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

British Aerospace BAe 146 Series Aeroplanes

AD/BAe 146/77

Amdt 3

Pylon to Wing Forward Attachment Bolts 11/2002

Applicability: All BAe 146 series and Avro 146-RJ aircraft.

Note: Check the Aircraft Technical Records for embodiment of modifications HCM01649A and HMC01649B before actioning the Requirement document.

Requirement: Action in accordance with BAe Systems Mandatory Service Bulletin (SB) 54-010 Revision 1 or SB 54-010 Revision 2.

Compliance: For aircraft that have achieved 4 years total time in service: Before accumulating 2,000 flights after 15 June 2000.

For aircraft that have not achieved 4 years total time in service:

Before accumulating 2,000 flights after 15 June 2000 or before achieving 4 years total time in service, whichever occurs later.

The compliance times remain unchanged by this issue. This Amendment becomes effective on 31 October 2002.

Background: The manufacturer received reports of in-service failures of engine pylon to wing forward attachment bolts. Investigation revealed the failures were due to corrosion in the bolt head undercut.

Amendment 1 allowed the inspection procedure to be carried out with the engines installed.

Amendment 2 introduced to the accomplishment instructions an alternative method to re-protect bolt non-threaded areas previously cadmium plated.

Amendment 3 is issued to re- instate SB 54-010 Revision 1 as an equivalent Requirement document of this Directive.

Amendment 2 of this Airworthiness Directive became effective on 16 May 2002.

British Aerospace BAe 146 Series Aeroplanes

AD/BAe 146/77 Amdt 3 (Continued)

Amendment 1 of this Airworthiness Directive became effective on 15 June 2000.

The original issue of this Airworthiness Directive became effective on 30 December 1999.

Signature of James Coyne, Delegate of the Civil Aviation Safety Authority.

James Coyne

Delegate of the Civil Aviation Safety Authority 20 September 2002

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 9 October 2002.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BAe 146/77 Amdt 3 - Pylon to Wing Forward Attachment Bolts

AIRWORTHINESS DIRECTIVE