---

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

 

Image unavailable in extracted text

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Image unavailable in extracted text

 

Boeing 767 Series Aeroplanes

 

AD/B767/156 In-Flight Entertainment System FAA STC SA7019NM-D

11/2001

 

Applicability: Model 767-300 series aeroplanes modified by United States Federal Aviation Administration (FAA) Supplemental Type Certificate (STC) SA7019NM-D.

 

Requirement: 1. Install a master power control switch for the in-flight entertainment (IFE) video system and associated wiring, in accordance with BFGoodrich Engineering Order (EO) 23-32-767-031 dated 16 August 2000.

 

2.        Amend the Flight Attendant Manual by inserting BFGoodrich 767 Flight Attendant Manual Supplement D2000-160, dated 16 August 2000, and amend the Aircraft Flight Manual (AFM) by inserting BFGoodrich B767 AFM Supplement D2001-025, dated 26 February 2001, into the Emergency Procedures section of the AFM.

 

3.        IFE may not be installed on any aeroplane in accordance with STC SA7019NM- D unless it is modified in accordance with BFGoodrich EO 23-32-767-031 and the Flight Attendant Manual and the AFM is revised in accordance with this Directive.

 

Note: FAA AD 2001-18-08 Amdt 39-12434 refers.

 

Compliance: For Requirement 1 - Within 18 months after the effective date of this Directive.

 

For Requirement 2 - Before further flight after installation of the master power control switch in accordance with Requirement 1.

 

For Requirement 3 - As of the effective date of this Directive.