---

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 

Image unavailable in extracted text
Image unavailable in extracted text Boeing 767 Series Aeroplanes

 

AIRWORTHINESS DIRECTIVE

Image unavailable in extracted text

Image unavailable in extracted text For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

 

AD/B767/126 Lower Body Anti-Collision Light and Cable Assembly

10/2000

 

Applicability: Model 767-200, -300 and -300F series aeroplanes; line numbers 1 through 739 inclusive.

 

Requirement: 1. Carry out either of the following actions in accordance with Boeing Service Bulletin (SB) 767-33A0075, Revision 1, dated 27 May 1999:

 

1. Perform a one-time general visual inspection to detect damage or chafing of the insulation or wires, and modify the cable assembly of the lower body anti- collision cable assembly.

 

or,

 

b.    Replace the cable assembly of the lower body anti-collision cable assembly with a new cable assembly.

 

2. If any damage or chafing is detected during the Requirement 1.a. inspection, repair the damaged or chafed part.

 

Note 1: SB 767-33A0075, Revision 1, refers to Grimes SB 60-3414-33-SB01, dated 8 December 1998, as an additional source of service information for accomplishment of the modification required by Requirement 1.a. of this Directive. Since Boeing issued the service bulletin, Grimes has issued SB 60-3414-33-SB01, Revision 1, dated 13 March 2000. Revision 1 of the Grimes service bulletin is an additional source of service information for accomplishment of the modification required by Requirement