Alternative Means of Compliance (AMOC):

For aeroplanes on which the intent of Boeing SB 747-78- 2151 Revision 2, dated 13 January 2000, was accomplished during production, or retrofitted subsequently, and implementing the periodic checks of both the electro- mechanical brake/lock and Centre Drive Unit (CDU) cone brake as detailed in FAA Alternative Means of Compliance (AMOC) document, reference 99-140S- 295, dated 13 August 1999, is an alternative means of compliance to Requirement 2 of this Directive.

3. Rolls-Royce RB211-524G/H series engines:

Carry out inspections and functional tests of the thrust reverser control and indication systems in accordance with paragraphs III.D. to III.K. of the Accomplishment Instructions of Boeing Service Bulletin 747-78-2115, dated 28 October 1993; or paragraphs III.D. to III.L. of the Accomplishment Instructions of Boeing Alert Service Bulletin 747-78A2115 Revision 1, dated 4 March 1994.

b. Repeat the inspections and functional tests of Requirement 3(a).

Compliance with AD/B747/230 Amdt 1 is terminating action for all of Requirement 3.

4. If any of the inspections and/or functional tests required by this Airworthiness Directive cannot be successfully carried out, or if any discrepancy is found during those inspections and/or functional tests, correct the discrepancy found in accordance with:

For Pratt & Whitney PW4000 series engines: Boeing Service Bulletin (SB) 747-78-2112, dated 11 November 1993, or Boeing Alert SB 747-78A2112 Revision 1, dated 7 March 1994.