Commonwealth legislation

AD/B747/251 Amdt 1 - Fuel Quantity Indicating System Wiring

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This Airworthiness Directive requires owners/operators of Boeing 747-100/200/300/SP/SR aeroplanes to replace fuel-quantity-indicating-system wiring outside tanks with shielded, separated wiring or to install FAA‑approved transient‑suppression alternatives. It aims to prevent electrical transients that could cause arcing and ignite fuel tanks.

Operators pay for parts, labour and downtime and must follow an FAA‑approved compliance method (e.g. Boeing service bulletin or STC); approvals are made by the FAA (Seattle ACO) and enforced by CASA, creating a technical compliance and inspection burden.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/B747/251 Amdt 1 - Fuel Quantity Indicating System Wiring.

AD/B747/251 Amdt 1 - Fuel Quantity Indicating System Wiring

View image in the official source

AIRWORTHINESS DIRECTIVE

View image in the official source

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B747/251 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

Boeing 747 Series Aeroplanes

AD/B747/251

Amdt 1

Fuel Quantity Indicating System Wiring 4/2004

Applicability: All Model 747-100, -200, -300, -SP and -SR series aeroplanes.

Requirement: Replace all the fuel quantity indication system (FQIS) wiring outside of the fuel tanks and surge tank with shielded wiring and install the new wiring so as to provide separation of that wiring from other aeroplane systems wiring in accordance with a method approved by Manager, Seattle Aircraft Certification Office, Federal Aviation Administration (FAA), Transport Airplane Directorate.

Installations of Smiths Industries Transient Suppression Units in accordance with Boeing SB 747-28-2233 dated 22 February 2001 (FAA STC ST00181SE refers), or in accordance with methods approved in FAA Letters 130S-00-0391 or 130S-03-375 are considered acceptable means of compliance with this Directive.

Note: FAA AD 98-20-40 Amdt 39-10808 refers.

Compliance: Remains unchanged as ‘Before 31 December 2001’.

This Amendment becomes effective on 15 April 2004.

Background: The FAA issued AD 98-20-40 following a failure analysis of the FQIS system and testing, which revealed that excessive energy levels in the electrical wiring and probes of the fuel system could be induced by electrical transients. The original Directive required actions intended to prevent electrical transients, introduced by electromagnetic interference or electrical short circuits from causing arcing of the FQIS electrical wiring or probes in the fuel tank(s). Such arcing could result in ignition of the fuel tank(s). The Directive also included FAA STC ST00181SE as an alternate method of compliance.

This amendment introduces an additional alternate method of compliance to allow the use of alternate indicators in previously modified aeroplanes.

Boeing 747 Series Aeroplanes

AD/B747/251 Amdt 1 (continued)

The original issue of this Directive became effective on 9 August 2001.

Signature of James Coyne, Delegate of the Civil Aviation Safety Authority.

James Coyne

Delegate of the Civil Aviation Safety Authority 4 March 2004

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 24 March 2004.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/B747/251 Amdt 1 - Fuel Quantity Indicating System Wiring

AIRWORTHINESS DIRECTIVE

Boeing 747 Series Aeroplanes

AD/B747/251

Amdt 1

Fuel Quantity Indicating System Wiring 4/2004

Applicability: All Model 747-100, -200, -300, -SP and -SR series aeroplanes.

Note: FAA AD 98-20-40 Amdt 39-10808 refers.

Compliance: Remains unchanged as ‘Before 31 December 2001’.

This Amendment becomes effective on 15 April 2004.

This amendment introduces an additional alternate method of compliance to allow the use of alternate indicators in previously modified aeroplanes.