Commonwealth legislation

AD/B747/180 Amdt 1 - Longeron Splice Fittings at Stringer 11, BS 2598

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This amendment requires operators of specified Boeing 747-100/200/300/SR/SP aircraft (line positions 201–886) to carry out a detailed visual inspection for cracking of the longeron splice fittings at stringer 11, body station 2598, following Boeing Alert Service Bulletin ASB 747-53A2410 and, after the effective date, using Revision 3 only. It shortens the previously allowed compliance time and adds mandatory repetitive inspections to detect fatigue cracking that could reduce horizontal stabiliser controllability. Operators must follow CASA’s timing and instructions and will bear inspection and repair costs (Requirement; Compliance; Background).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/B747/180 Amdt 1 - Longeron Splice Fittings at Stringer 11, BS 2598.

AD/B747/180 Amdt 1 - Longeron Splice Fittings at Stringer 11, BS 2598

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
View image in the official source
Boeing 747 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B747/180 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/B747/180

Amdt 1

Longeron Splice Fittings at Stringer 11, BS 2598 9/2000

Applicability: Model 747-100, 747-200, 747-300, 747SR, and 747SP series aircraft with line positions 201 through 886.

Requirement: Perform a detailed visual inspection to detect cracking of the longeron fittings at stringer 11, on the left and right sides at body station (BS) 2598, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin (ASB) 747- 53A2410, Revision 2, including Addendum, or ASB 747-53A2410 Revision 3, including Addendum. After the effective date of this Directive, only ASB 747- 53A2410 Revision 3 shall be used.

Note: FAA AD 2000-10-23 Amdt 39-11748 refers.

Compliance: As specified in the Requirement document for the initial and repetitive inspection requirements, with a revised effective date of 7 September 2000.

This Amendment becomes effective on 7 September 2000.

Background: The FAA received reports of fatigue cracking of the longeron splice fittings at BS 2598 on Model 747SR and 747-200 series aircraft. The most recent cracking was detected on an aircraft that had accumulated 62,783 total flight hours and 16,867 total flight cycles. Such fatigue cracking, if not detected and corrected, could result in reduced controllability of the horizontal stabiliser.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Amendment 1 is issued in response to a new FAA AD which reduces the compliance time for accomplishment of the currently required inspection and adds a new requirement for repetitive inspections. This action was prompted by reports of fatigue cracking found on longeron splice fittings.

The original issue of this Airworthiness Directive became effective on 26 March 1998.

Signature of David Villiers, Delegate of the Civil Aviation Safety Authority.

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 27 July 2000

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 9 August 2000.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/B747/180 Amdt 1 - Longeron Splice Fittings at Stringer 11, BS 2598

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Boeing 747 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B747/180 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/B747/180

Amdt 1

Longeron Splice Fittings at Stringer 11, BS 2598 9/2000

Applicability: Model 747-100, 747-200, 747-300, 747SR, and 747SP series aircraft with line positions 201 through 886.

Note: FAA AD 2000-10-23 Amdt 39-11748 refers.

Compliance: As specified in the Requirement document for the initial and repetitive inspection requirements, with a revised effective date of 7 September 2000.

This Amendment becomes effective on 7 September 2000.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES