Commonwealth legislation

AD/B737/82 Amdt 2 - Thrust Reverser Sync-Lock System Test

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

5/10 complexity

This Airworthiness Directive requires operators of Boeing 737-300/‑400/‑500 aeroplanes fitted with thrust‑reverser sync‑locks per Boeing Service Bulletin 737‑78‑1053 to add a periodic functional sync‑lock integrity test and to meet amended pass/fail movement limits (Requirement). Operators must correct any discrepancies before further flight or may operate under an approved MEL with the sync‑lock deactivated and locked (Requirement/Compliance). Operators bear testing, repair and downtime costs; CASA issued and enforces the AD (Applicability/Signature).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/B737/82 Amdt 2 - Thrust Reverser Sync-Lock System Test.

AD/B737/82 Amdt 2 - Thrust Reverser Sync-Lock System Test

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
View image in the official source
Boeing 737 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B737/82 Amdt 1 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/B737/82

Amdt 2

Thrust Reverser Sync-Lock System Test 7/2000

Applicability: All Boeing 737-300, -400, and -500 series aircraft fitted with thrust reverser sync- locks in accordance with Boeing Service Bulletin 737-78-1053.

Requirement: 1. Revise respective Boeing 737 systems of maintenance to include a periodic functional test of the thrust reverser sync lock-system that meets the intent of the test specified in FAA AD 94-21-05 Revision 1 Amdt 39-9314 on page 2 titled “Thrust Reverser Sync-Lock Integrity Test”. The following amendments shall be included in the FAA AD Sync-Lock Integrity Test.

Amend paragraph B. (2) to read “Make sure both thrust reverser sleeves did not move aft more than 0.08 inches.”

Amend paragraph B. (4) to read ” Make sure that both reverser sleeves move aft a minimum of 0.15 inches, but not more than 1.25 inches.”

Note 1: Boeing All Operator Message M-7272-94-6132 dated 19 December 1994 advises FAA approval of two alternate Means of Compliance to FAA AD 94-21-05 R1.

Functionally test the thrust reverser sync-lock system in accordance with the test introduced by Requirement 1 of this Directive.

If any discrepancy is found during this test either rectify the defect before further flight or operate the aircraft in accordance with an approved MEL. Operation under the provisions and limitations of an MEL is permitted provided the failed sync-lock system is deactivated and in the locked position.

Compliance: 1. Upon incorporation of Boeing Service Bulletin 737-78-1053 on any aircraft.

Within 4000 hours time in service since the incorporation of Boeing Service Bulletin 737-78-1053, or within 4000 hours time in service after 2 February 1995, whichever occurs later. Thereafter, reinspect at intervals not exceeding 4000 hours time in service.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Note 2: AD/B737/81 Amdt 1 mandated compliance with Boeing Service Bulletin 737- 78-1053R1, R2 or R3 by 31 December, 1999.

Note 3: FAA AD 94-21-05 R1 Amdt 39-9314 refers and revises 94-21-05 Amdt 39-

This Amendment becomes effective on 13 July 2000.

Background: The original Directive was issued to introduce a periodic functional test of the thrust reverser sync-lock system. The sync-lock system was introduced as part of an on- going design review of thrust reverser systems following an accident that was attributed to an uncommanded in-flight deployment of a thrust reverser.

Amendment 1 issued in November 95 raised to reflect a minor editorial revision to the original FAA AD and make reference to an approved alternate test.

Amendment 2 was issued to clarify and include FAA approved changes to the FAA Sync-Lock Integrity Test Procedures and Reference latest FAA AD and Boeing message dated 19 December 1994.

Amendment 1 of this Airworthiness Directive became effective on 9 November 1995.

The original issue of this Airworthiness Directive became effective on 2 February 1995.

Signature of Eugene Paul Holzapfel, Delegate of the Civil Aviation Safety Authority.

Eugene Paul Holzapfel

Delegate of the Civil Aviation Safety Authority 31 May 2000

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 14 June 2000.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/B737/82 Amdt 2 - Thrust Reverser Sync-Lock System Test

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Boeing 737 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B737/82 Amdt 1 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/B737/82

Amdt 2

Thrust Reverser Sync-Lock System Test 7/2000

Applicability: All Boeing 737-300, -400, and -500 series aircraft fitted with thrust reverser sync- locks in accordance with Boeing Service Bulletin 737-78-1053.

Amend paragraph B. (2) to read “Make sure both thrust reverser sleeves did not move aft more than 0.08 inches.”

Amend paragraph B. (4) to read ” Make sure that both reverser sleeves move aft a minimum of 0.15 inches, but not more than 1.25 inches.”

Note 1: Boeing All Operator Message M-7272-94-6132 dated 19 December 1994 advises FAA approval of two alternate Means of Compliance to FAA AD 94-21-05 R1.

Functionally test the thrust reverser sync-lock system in accordance with the test introduced by Requirement 1 of this Directive.

Compliance: 1. Upon incorporation of Boeing Service Bulletin 737-78-1053 on any aircraft.