AD/B737/48 - Rudder Trim
1AD/B737/48 - Rudder Trim
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/B737/48 - Rudder Trim.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Boeing 737 Series Aeroplanes
AD/B737/48 Rudder Trim 11/90
Applicability: All model 737-300 and 737-400 series.
Requirement: 1. Replace the rudder trim control knob with a smooth round fluted knob.
- If the rudder trim control knob is located near the rear of the cockpit centre console, add a guard rail with a height of approximately 38 mm (1.5 inches) to the rear of the cockpit centre console if no rail is currently installed; or, if a rail is currently installed, raise the cockpit centre console rear rail to a height of approximately 38 mm (1.5 inches).
Note: FAA AD 90-14-02 Amdt 39-6644 and Boeing Service Bulletin 737-27-1165 refer.
Compliance: Prior to 30 November 1991.
Background: This Directive is raised in response to reports of inadvertent rudder trim actuation. This condition could lead to a take-off with an improperly trimmed rudder, and may result in a rejected take-off.