Boeing 737 Series Aeroplanes
Boeing 737 Series Aeroplanes
Boeing 737 Series Aeroplanes
| AD/B737/244 | Engine Strut Seal | 7/2005 |
|---|
| Applicability: | Model 737-600, -700, and -800 series aircraft, as identified in Boeing Special Attention Service Bulletin 737-54-1040 Revision 1, dated 14 August 2003, or later FAA approved revision. |
|---|---|
| Requirement: | Action in accordance with the technical requirements of FAA AD 2005-08-10 Amdt 39-14062.Note: Boeing Special Attention Service Bulletins 737-54-1040 original issue,737-54-1040 Revision 1, or later FAA approved revision, refer. |
| Compliance: | As specified in the Requirement document, with a revised effective date of 7 July 2005. |
| This Airworthiness Directive becomes effective on 7 July 2005. | |
| Background: | The FAA received a report that an injection seal in the engine strut area may not have been properly completed or installed during production. This condition could allow leaking flammable fluid onto a hot engine exhaust nozzle or into the engine core fire zone, and a consequent uncontrolled fire. |
View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority
25 May 2005