Commonwealth legislation

AD/B737/232 - Horizontal Stabiliser Pivot Hinge Pins

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This AD requires operators of Boeing 737‑100/200/200C/300/400/500 aircraft (line numbers 1–3132) to carry out the inspections and corrective actions set out in FAA AD 2004‑19‑10 and the referenced Boeing service bulletin to address corrosion in the horizontal stabiliser pivot hinge pins. It matters because corrosion and stress‑corrosion cracking of primary and fail‑safe pins can allow pins to migrate, cause intermittent stabiliser movement and risk loss of control; operators must pay for and complete the work by the effective date (25 November 2004).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/B737/232 - Horizontal Stabiliser Pivot Hinge Pins.

AIRWORTHINESS DIRECTIVE

View image in the official source

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

Boeing 737 Series Aeroplanes

AD/B737/232 Horizontal Stabiliser Pivot

AD/B737/232 Horizontal Stabiliser Pivot Hinge Pins 12/2004

Applicability: Model 737-100, -200, -200C, -300, -400, and -500 series aircraft, line numbers 1

through 3132.

Requirement: Action in accordance with the technical requirements of FAA AD 2004-19-10 Amdt 39-13804.

Note: Boeing Alert Service Bulletin 737-55A1077 original issue, or later FAA approved revision, refers.

Compliance: As specified in the Requirement document, with a revised effective date of 25 November 2004.

This Airworthiness Directive becomes effective on 25 November 2004.

Background: Reports have been received of corrosion in the pivot hinge pins that attach the horizontal stabiliser centre section to the Body Station 1156 support bulkhead. The degree of corrosion found on outer primary pins, and inner fail-safe pins made from both 4330steel and 15-5 PH corrosion resistant steel, could increase the likelihood of stress corrosion cracking. An undetected failure of the outer primary pin and the inner fail-safe pin could enable the pins to migrate out of the stabiliser hinge joint and result in intermittent movement of the horizontal stabiliser structure, and consequent loss of controllability of the aircraft.

Signature of David Villiers, Delegate of the Civil Aviation Safety Authority.

David Villiers

Delegate of the Civil Aviation Safety Authority 14 October 2004

View image in the official source

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

AIRWORTHINESS DIRECTIVE AIRWORTHINESS DIRECTIVE

AIRWORTHINESS DIRECTIVE

Boeing 737 Series Aeroplanes

AD/B737/232 Horizontal Stabiliser Pivot AD/B737/232 Horizontal Stabiliser Pivot Hinge Pins 12/2004

AD/B737/232 Horizontal Stabiliser Pivot Hinge Pins 12/2004

Applicability: Model 737-100, -200, -200C, -300, -400, and -500 series aircraft, line numbers 1

through 3132.

Requirement: Action in accordance with the technical requirements of FAA AD 2004-19-10 Amdt 39-13804.

Note: Boeing Alert Service Bulletin 737-55A1077 original issue, or later FAA approved revision, refers.

Compliance: As specified in the Requirement document, with a revised effective date of 25 November 2004.

This Airworthiness Directive becomes effective on 25 November 2004.

David Villiers

Delegate of the Civil Aviation Safety Authority 14 October 2004