Commonwealth legislation

AD/B737/214 - Fuselage Skin Lap Joint - Fatigue Cracking

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires operators of certain Boeing 737-200/200C/300/400/500 aeroplanes (line numbers 292–2947) to perform inspections and corrective actions for fuselage skin lap joints in line with FAA AD 2003-14-06 and Boeing Service Bulletin 737-53-1179 Rev 2. CASA (by delegate) issues the AD; aircraft operators must carry out and pay for the inspections/repairs on the schedule set out, to address fatigue cracking that could lead to rapid decompression.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/B737/214 - Fuselage Skin Lap Joint - Fatigue Cracking.

AIRWORTHINESS DIRECTIVE

View image in the official source

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

Boeing 737 Series Aeroplanes

AD/B737/214 Fuselage Skin Lap Joint - Fa

AD/B737/214 Fuselage Skin Lap Joint - Fatigue Cracking 9/2003

Applicability: Model 737-200, -200C, -300, -400 and -500 series aircraft; line numbers 292 to 2947 inclusive.

Requirement: Action in accordance with the technical requirements of FAA AD 2003-14-06, Amdt 39-13225.

Note: Boeing Service Bulletin 737-53-1179 Revision 2 refers.

Compliance: As specified in the Requirement document, with a revised effective date of 23 July 2003.

This Airworthiness Directive becomes effective on 23 July 2003.

Background: The FAA has received a report of a significant number of cracks along the fuselage skin lap joint of a Boeing 737-300 series aircraft. This aircraft had accumulated 35,710 flight cycles. During scheduled maintenance, fatigue cracks were found on a lap joint that extends from aft of the flight deck to the wing front spar just above the passenger windows. Some of the cracks had linked up to form a 10-inch crack. The cracks were attributed to delaminated skin doublers, due to improper processing during phosphoric anodising. The improperly processed panels were installed on certain aircraft during manufacture and were available to other 737 aircraft models as spare parts.

The condition, if not corrected, may result in fatigue cracks in the lap joints and consequent rapid decompression of the aircraft.

Signature of David Villiers, Delegate of the Civil Aviation Safety Authority.

David Villiers

Delegate of the Civil Aviation Safety Authority 17 July 2003

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 23 July 2003.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

AIRWORTHINESS DIRECTIVE AIRWORTHINESS DIRECTIVE

AIRWORTHINESS DIRECTIVE

Boeing 737 Series Aeroplanes

AD/B737/214 Fuselage Skin Lap Joint - Fa AD/B737/214 Fuselage Skin Lap Joint - Fatigue Cracking 9/2003

AD/B737/214 Fuselage Skin Lap Joint - Fatigue Cracking 9/2003

Applicability: Model 737-200, -200C, -300, -400 and -500 series aircraft; line numbers 292 to 2947 inclusive.

Requirement: Action in accordance with the technical requirements of FAA AD 2003-14-06, Amdt 39-13225.

Note: Boeing Service Bulletin 737-53-1179 Revision 2 refers.

Compliance: As specified in the Requirement document, with a revised effective date of 23 July 2003.

This Airworthiness Directive becomes effective on 23 July 2003.

The condition, if not corrected, may result in fatigue cracks in the lap joints and consequent rapid decompression of the aircraft.

David Villiers

Delegate of the Civil Aviation Safety Authority 17 July 2003

The above AD is notified in the Commonwealth of Australia Gazette on 23 July 2003.