CTHIn ForceLegislation
AD/B737/152 Amdt 1 - Centre Fuel Tank - Limitations
Boeing 737 Series AeroplanesBoeing 737 Series Aeroplanes
Start here
Get a plain-English read of Boeing 737 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/B737/152 Amdt 1 - Centre Fuel Tank - Limitations.
Boeing 737 Series Aeroplanes
| AD/B737/152 Amdt 1 | Centre Fuel Tank - Limitations | 18/2011 |
|---|
| Applicability: | All Model 737 series aeroplanes. |
|---|---|
| Requirement: | Revise the Limitations Section of the Aircraft Flight Manual (AFM) to include the information detailed in FAA AD 2001-08-24 Amdt 39-12201. |
| Compliance: | Date remains unchanged to that detailed in the original issue of this Directive.Despite the new AD/B737/152 Amdt 1, an exclusion or an alternate method of compliance that was in force before the coming into effect of AD/B737/152 Amdt 1 continues to be in force. |
| This Airworthiness Directive becomes effective on 30 September 2011. | |
| Background: | On 3 March 2001, a Boeing Model 737-400 series airplane caught fire and burned while parked at a bay at the Don Muang International Airport, Bangkok, Thailand. Although the accident investigation is ongoing and the probable cause of the accident has not been identified, the Government of Thailand, in conjunction with the United States National Transportation Safety Board, has determined that the centre tank exploded shortly after the main fuel tanks of the airplane were refuelled. It appears that the centre tank fuel pumps were operating dry (no fuel passing through them) at the time of the explosion.This accident is similar to a 1990 centre tank explosion on a Boeing Model 737-300 airplane. The ignition source of that explosion was never identified. The centre tank fuel pumps were operating dry at the time of that explosion.Extended dry operation of the centre tank fuel pumps, which occurred prior to both incidents, is contrary to the manufacturer’s procedures for safe operation of the fuel pumps. Extended dry pump operation can result in overheating and excessive wear of the pump bearings and consequent contact between rotating and nonrotating parts of the pumps. Both overheating of the bearings and contact between rotating and nonrotating parts have the potential to create an ignition source in the form of hot surfaces or sparks. In addition, during dry operation of the pumps, ignition of vapour in a fuel pump can create a flame front that can reach the fuel tank and cause a fuel tank explosion. |
| This Directive is issued to prevent ignition of fuel vapours due to the generation of sparks and a potential ignition source inside the centre tank caused by metal-to-metal contact during dry fuel pump operation, which could result in a fire or explosion of the fuel tank. This Directive requires revising the AFM to prohibit extended dry operation of the centre tank fuel pumps.This amendment deletes the original text of the AD and incorporates the original FAA AD by reference. This was done to facilitate easier cross referencing to FAA AD 2011-18-03 Amdt 39-16785 which details the terminating action for the requirement of this AD.The original issue of this AD became effective on 10 May 2001.Alternative Methods of Compliance for AD 2001-08-24 Amdt 39-12201 that are approved by the FAA are acceptable as a means of compliance against this AD. |
|---|