CTHIn ForceLegislation
AD/B717/9 Amdt 1 - Wing Rear Spar
Boeing 717 Series AeroplanesBoeing 717 Series Aeroplanes
Start here
Get a plain-English read of Boeing 717 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/B717/9 Amdt 1 - Wing Rear Spar.
Boeing 717 Series Aeroplanes
| AD/B717/9 Amdt 1 | Wing Rear Spar | 7/2005 |
|---|
| Applicability: | Model 717-200 aircraft, with manufacturer’s fuselage numbers 5002 through 5058 inclusive. |
|---|---|
| Requirement: | Modify the attachment holes in the rear spar of the left and right wings in accordance with Boeing Service Bulletin 717-57-0001, Revision 01 or later revision that has been approved by the FAA as an alternative method of compliance (AMOC).Note: FAA AD 2003-10-10 Amdt 39-13155 refers. |
| Compliance: | Before the accumulation of 30,000 total flight cycles or within 10 years after 7 August 2003, whichever occurs first. |
| This Amendment becomes effective on 7 July 2005. | |
| Background: | The FAA requires certain modifications to prevent fatigue cracking of the wing rear spar. Such cracking could result in reduced structural integrity.This amendment is issued to allow the use of later revisions of the service bulletin, provided they are approved by the FAA as an alternative method of compliance (AMOC). There is no change to the compliance.The original issue of this AD became effective on 7 August 2003. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
25 May 2005