Boeing 717 Series Aeroplanes
Boeing 717 Series Aeroplanes
| AD/B717/22 | First Officer Pitot Static Heater System | 9/2007 |
|---|
| Applicability: | Model 717-200 aeroplanes, as identified in Boeing Alert Service Bulletin (ASB)717-30A0003, Revision 2, dated 28 November 2006. |
|---|---|
| Requirement: | Change the wiring for the air data sensor heating system, by accomplishing all the actions specified in the Accomplishment Instructions of ASB 717-30A0003,Revision 2. |
| Actions accomplished before the effective date of this Directive in accordance with Boeing ASB717-30A0003, Revision 1, dated 2 March 2006, are acceptable for compliance with the corresponding provisions of this Directive. | |
| Later revisions of the above SB, approved by the United States Federal Aviation Administration (FAA) as an Alternate Method of Compliance (AMOC) to FAA AD 2007-13-01, are considered acceptable for compliance with the equivalent Requirements of this Directive. | |
| Note: FAA AD 2007-13-01 Amdt 39-15105 refers. | |
| Compliance: | Within 24 months after the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 30 August 2007. | |
| Background: | The FAA has advised of a report of temporary loss of the auto-flight function with displays of suspect or erratic airspeed indications. This Directive is issued to prevent display of suspect or erratic airspeed indications during heavy rain conditions, which could reduce the ability of the flight crew to maintain the safe flight and landing of the aeroplane. |
View image in the official source
David Punshon
Delegate of the Civil Aviation Safety Authority
3 July 2007