CTHIn ForceLegislation
AD/AUS/5 Amdt 1 - Landing Gear
1AD/AUS/5 Amdt 1 - Landing Gear
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/AUS/5 Amdt 1 - Landing Gear.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Auster/Beagle A.61 Series Aeroplanes
AD/AUS/5
Amdt 1
Landing Gear 11/67
Applicability: All models manufactured before October 1947.
Requirement: 1. Inspect the welding at the top of the radius rods near the shock cord spools for cracks and other damage.
2. Inspect the lower end of the radius rods and the radius rod attachment bolts for damage. Turn the attachment bolts with a spanner and, if excessively tight, remove the bolts and inspect for damage and distortion.
3. Remove landing wheels and inspect the welds at the stub axle roots for cracks.
4. Replace defective components or repair in accordance with a repair scheme approved by the Secretary.
5. The inspections required by the preceding paragraphs are to be made with the aid of a hand lens of not less than 10X magnification.
Compliance: At intervals not exceeding 500 hours time in service and after each heavy landing.