CTHIn ForceLegislation
AD/AT 800/8 - Hopper Rinse Tank Shelf Attachment
Airtractor 800 Series AeroplanesAirtractor 800 Series Aeroplanes
Start here
Get a plain-English read of Airtractor 800 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/AT 800/8 - Hopper Rinse Tank Shelf Attachment.
Airtractor 800 Series Aeroplanes
| AD/AT 800/8 | Hopper Rinse Tank Shelf Attachment | 12/2006 |
|---|
| Applicability: | Model AT-802 and AT-802A aircraft, serial numbers 802/802A-0001 through 802/802A-0219. |
|---|---|
| Requirement: | 1. Inspect the three attach angles on the firewall mounted hopper rinse tank shelf for damage and/or cracks in accordance with Snow Engineering Co. Service Letter (SL) No. 248, dated 31 August 2005.If damage and/or cracks are evident during any inspection, before further flight, replace all three attach angles with steel attach angles, part number 60568-3 (or FAA-approved equivalent part number), in accordance with SL No. 248.2. Do not install aluminium attach angles on the hopper rinse tank shelf.Note 1: Replacement of aluminium attach angles with steel attach angles terminates the repetitive inspection requirement of this Directive.Note 2: FAA AD 2006-20-10 Amdt 39-14779 refers. |
| Compliance: | 1. Within 100 hours time in service after 23 November 2006, and thereafter at intervals not to exceed 100 hours time in service until steel attach angles, part number 60568-3(or FAA-approved equivalent part number), are installed.2. As of 23 November 2006. |
| This Airworthiness Directive becomes effective on 23 November 2006. | |
| Background: | The FAA received a report of an uncommanded change in an aircraft’s engine power setting. Investigation revealed the cause as failure of the attach angles and separation of the hopper rinse tank shelf from the firewall, which shifted the engine power cables. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
12 October 2006