AD/AS 355/72 Amdt 1 - Cyclic Control
1AD/AS 355/72 Amdt 1 - Cyclic Control
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/AS 355/72 Amdt 1 - Cyclic Control.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
AIRWORTHINESS DIRECTIVE
Image unavailable in extracted text
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/AS 355/72 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Image unavailable in extracted text
Eurocopter AS 355 (Twin Ecureuil) Series Helicopters
AD/AS 355/72
Amdt 1
Cyclic Control 5/2004
Applicability: Model AS 355 helicopters, versions E, F, F1, F2, and N, with MOD 070682 incorporated (Eurocopter AS 355 Service Bulletin No. 67.08), and before incorporation of MOD 073179.
Requirement: Accomplish the requirements of Eurocopter AS 350 Alert Service Bulletin No.
67.00.24.
Note: DGAC AD F-2003-003 R1 refers.
Compliance: Before 12 March 2003, unless already accomplished. Thereafter, after each readjustment of the cyclic stick longitudinal nose-up control stop, accomplish Paragraph 2.B.1 of the Requirement document.
The compliance times remain unchanged by this issue. This Amendment becomes effective on 13 May 2004.
Background: The manufacturer determined that there could be a risk of interference when applying a load to the cyclic stick in the nose-up control stop position configuration, during a give-way manoeuvre.
Amendment 1 is issued in response to a revision of the related DGAC AD, which introduces the conversion of the previous Alert Telex Requirement document to Alert Service Bulletin, with no change to technical content.
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority 2 April 2004
Image unavailable in extracted text
The above AD is notified in the Commonwealth of Australia Gazette on 21 April 2004.
Page 1 of 1